Iron Sets (3-PW) $320
Completely Refinish heads, Check Lie, Loft & Length, Spine align shafts, Set Swing-weight & Install Grips. You get your choice of paint-fill and ferrule color
Iron Sets (4-PW) $280
Completely Refinish heads, Check Lie, Loft & Length, Spine align shafts, Set Swing-weight & Install Grips. You get your choice of paint-fill and ferrule color
Iron Sets (5-PW) $240
Completely Refinish heads, Check Lie, Loft & Length, Spine align shafts, Set Swing-weight & Install Grips. You get your choice of paint-fill and ferrule color
Any other set make-ups are $40 per club
** Please note if you send in anything other than an assembled golf club such as heads only and the hosels have not been properly cleaned or if you send a set of pulled shafts that the tips have not been properly cleaned/prepped there will be an additional charge to clean them
*** Grips are not included in the refinishing price***
** PXG Irons are an additional $5 per club due to the shim & collared ferrule
***Please DO NOT use popcorn foam/bubble wrap packaging or excessive tape that must be cut away to access your clubs What may seem like protection in transit may potentially harm your clubs if we have to cut away lots of tape and bubble wrap, etc.
Wedges $55 (Per Wedge)
Our first step in the process is to mill (port) 6 holes in the back of the club muscle, raising the center of gravity. This moves the sweet spot to the center of the club, just where it should be, giving your ball a lower more penetrating flight with a piercing trajectory and adding more control.
Second,
We check the groove depth and if needed we painstakingly mill ($12 per club) the individual grooves in each wedge, then finish by milling the wedge face. (Non conforming square groove specification) allowed by the U.S.G.A. This gives your ball more spin than any other wedge in golf.
When this process is complete, you now have a beautiful wedge that produces a slightly lower, more penetrating ball flight with a piercing trajectory and 15 to 20 percent more spin just like a Tour Pro!!! -- Our wedges are specifically designed for the more aggressive player who likes to go flag-hunting.
*** Grips are not included in the refinishing price***
** PXG Wedges are an additional $5 per club due to the shim & collared ferrule
***Please DO NOT use popcorn foam/bubble wrap packaging or excessive tape that must be cut away to access your wedges What may seem like protection in transit may potentially harm your wedgess if we have to cut away lots of tape and bubble wrap, etc.
Putters -- Starting at $75 Includes all refinishing of minor nicks and scratches, 1 color paint fill. Each additional paint fill color $20
If your putter has an insert Please all or email for more details/pricing
------------------------------------
Shafts are $15 each 1 color
Drivers, Fairway Woods & Hybrids -- Starting at $75 Includes all refinishing of minor nicks, chips and scratches, 1 color paint fill. Each additional paint fill color $20
Please all or email for more details/pricing
Iron Set (3-PW) $160
Check Lie, Loft & Length and set to customers specs -- Set Swing-Weight to factory standard install ferrules (you choose the color) & grips
***Any other set make-up is $20 per club***
***Please note: If shafts need to be extended there is an additional $5 per club charge***
***Please DO NOT use popcorn foam/bubble wrap packaging or excessive tape that must be cut away to access your clubs What may seem like protection in transit may potentially harm your clubs if we have to cut away lots of tape and bubble wrap, etc.
Golf clubs are cast or forged from a variety of metals. It is important to understand that as a golf club is altered for loft and/or lie, there is a chance that the head may break. This is no reflection on the skill of the person, or the state of the equipment, and it is just something that occasionally happens. It is very rare, but there is always an element of risk when you are applying significant force, through an iron bar, to metal that is clamped into a special vice. The good news is that it is very rare for a club to break. Also, as part of the bending process, there is a slim chance that the bending bar may mark the surface of softer iron heads. We try to reduce and even eliminate this by using hosel protectors, sole protectors, and top line protectors, but with very soft cast clubs, or forged clubs, it is sometimes a feature of the bending process. Some may say that it adds marks of distinction. Remember, this is metal against metal and a lot of force is applied. Due to these potential problems, there can be no warranty stated or implied that a golf club being bent will be guaranteed against breakage or surface damage. We take extreme care and use tried and tested bending procedures at all times. We will discuss with you the amount of bending to be done. However, if metal failure occurs then Tiger Nick Golf Club Solutions cannot and will not be held liable or responsible for any head breakage. No remuneration or recompense to the club owner or replacement of club head(s) is implied or given due to breakage or damage of any kind. This is due to the nature of the golf clubhead manufacturing process and materials, and is no reflection upon the skills of the person or the equipment used in bending the clubs. By purchasing this service and sending us your clubs for alteration, you confirm that you understand the nature of golf club bending and release both Tiger Nick Golf Club Solutions and the operator performing the loft and lie alteration from any responsibility should any damage occur..
Copyright © 2021 Tiger Nick Golf - All Rights Reserved.
Powered by GoDaddy Website Builder